FAQS

1.

What type of Vinyl and Laminate does WrapOne use?

WrapOne uses the worldwide leader in adhesive technologies Avery, Arlon Graphics and 3M Backed with a 5 year warranty.

2.

What can be wrapped? A concrete wall? What about a boat?

We can wrap on any clean smooth surface that can be reached by lifts or ladders.  Vehicles, floors, walls and Windows.

3.

Will a wrap damage the paint or surface of what is being wrapped?

No, when applied and removed correctly by a professional WrapOne installer, the wrap will actually protect what it is covering.

4.

Wil my wrap peel or fade?

The majority of wraps last for 4  to 5 years. All of our wraps are done with Avery technologies, 3M and Arlon Graphics.

5.

How should I maintain my wrap?

Wraps should always be hand washed with a gentle detergent using a soft sponge or cloth.  Once per week wash is recommended.

Rinse with clear water after washing. Minimize water spotting by using a silicone squeegee or chamois to remove water. Dry with a clean microfiber cloth.

6.

Can i Pressure wash my wrap?

If you want to pressure wash your wrap, keep it below 2,000 psi. Use a spray nozzle with a 40 degree wide angle spray pattern and keep water temperature below 140 degrees Fahrenheit. Keep the spray nozzle at least 12 inches away from the car edges. 

7.

What about difficult stains?

Letting a stain sit for too long will make them harder to remove and may permanently damage the wrap. Soak the affected area for a few minutes with warm, soapy water to loosen the contaminants. Rinse completely and dry with a microfiber cloth.

8.

What products should I avoid when cleaning my wrap?

Never use any of the following cleaning products on your wrap:

Solvents

Oil Based Cleaners

Kitchen & Bathroom Cleaners

Oven Cleaner

Car Wax